濟南誠耐金屬制品有限公司

濟南誠耐金屬制品有限公司

不斷發展技術力量、完善的設計服務團隊,真誠為您提供的服務

咨詢熱線
于經理15194166167
15990909037

聯系我們

企業名稱:濟南誠耐金屬制品有限公司

聯系人:于經理

電話: 15990909037

電話: 15194166167

地址:山東省濟南市歷城區小清河南路8288號

當前位置:首頁 »資訊中心 » 行業動態不銹鋼電梯門套如何安裝

不銹鋼電梯門套如何安裝

來源:http://www.yippyshippy.com/ 瀏覽:0發表時間:2022-12-31
(一)安裝工具
(1) Installation tools
主要安裝工具:電錘、沖擊鉆、汽釘槍、氣泵、氬弧焊機、氣瓶等。
Main installation tools: electric hammer, impact drill, steam nail gun, air pump, argon arc welding machine, gas cylinder, etc.
輔助安裝工具:水平儀、垂直尺、鉛墜儀、射釘槍及射釘、木工電鋸、角磨機等,均采用國內產品,并定期到有關檢驗部門進行檢驗。
Auxiliary installation tools: level, vertical ruler, plumb bob, nail gun and nail, woodworking electric saw, angle grinder, etc. are all domestic products, and they are regularly inspected by relevant inspection departments.
安裝工具的特點:準確率高,效率快,能適應各大型工程的不銹鋼電梯門套的安裝使用。
The installation tool features high accuracy and efficiency, and can adapt to the installation and use of stainless steel elevator door jambs in large projects.
(二)電梯門套的安裝:
(2) Installation of elevator door pocket:
1、不銹鋼電梯門套的安裝工序:購買材料:15mm大芯板,九厘中密度板,1.15mm不銹鋼板。
1. Installation process of stainless steel elevator door pocket: purchasing materials: 15mm large core plate, 9mm medium density plate, 1.15mm stainless steel plate.
(1)根據電梯門洞口尺寸下料:龍骨采用大芯板切割和面板。
(1) Blanking according to the size of elevator door opening: the keel is cut with large core plate and panel.
(2)分層安裝龍骨和面板:把龍骨與墻固定牢。
(2) Install keel and panel in layers: fix keel and wall firmly.
(3)電梯門框上找2cm線。
(3) Locate 2cm line on the elevator door frame.
(4)在2200mm左右邊水泥墻上安裝間距≤500mm龍骨五處,下部距地面100mm,上部距頂端200mm,中間均與分布間距≤500mm;上部?jì)商帯?/div>
(4) Five keels with a spacing of ≤ 500mm shall be installed on the cement wall at the left and right sides of 2200mm, the lower part shall be 100mm from the ground, the upper part shall be 200mm from the top, and the middle part shall be ≤ 500mm from the distribution; Upper two.
(5)安裝面板,調整好面板的水平度和垂直。
(5) Install the panel and adjust the levelness and verticality of the panel.
(6)把面板固定牢固。
(6) Fix the panel firmly.
2、電梯門套木龍骨框安裝的允許偏差。
2. Allowable deviation of elevator door jamb wooden keel frame installation.
從造型上來看,電梯門套是比較多,而不銹鋼這種材
From the perspective of modeling, there are many elevator door covers, and stainless steel is the material
以上就是為大家介紹的有關濟南電梯門套上門安裝詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.yippyshippy.com
The above is a detailed introduction to the door-to-door installation of Jinan elevator door jambs. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.yippyshippy.com