濟南誠耐金屬制品有限公司

濟南誠耐金屬制品有限公司

不斷發展技術力量、完善的設計服務團隊,真誠為您提供的服務

咨詢熱線
于經理15194166167
15990909037

聯系我們

企業名稱:濟南誠耐金屬制品有限公司

聯系人:于經理

電話: 15990909037

電話: 15194166167

地址:山東省濟南市歷城區小清河南路8288號

當前位置:首頁 »資訊中心 » 新聞資訊不銹鋼門套的設計、制作及安裝

不銹鋼門套的設計、制作及安裝

來源:http://www.yippyshippy.com/ 瀏覽:0發表時間:2022-04-28
門套
Door pocket
常用于門扇的固定、護角、裝飾等,用來保護門免受刮傷、腐蝕、破損、臟污等,目前隨著人們對生活質量要求的提高,個人審美需求在更大程度上提升。
It is often used for door leaf fixing, corner protection, decoration, etc. to protect the door from scratch, corrosion, damage, dirt, etc. at present, with the improvement of people's requirements for quality of life, personal aesthetic needs have increased to a greater extent.
不銹鋼門套有兩種樣式
There are two styles of stainless steel door pocket
一種是垂直與水平面成45度角的形式,另一種是垂直與水平面垂直安裝。建議采用后者。前者有時需要焊接和碰撞,非常麻煩,效果不好。常用的不銹鋼板分為201型和304型。事實上,成分是不同的。304的質量稍好一點,但較高。201有點差,大型或寫字樓需要304不銹鋼來滿足需求。板的厚度也不同,一般0.6就足夠了。
One is the form of 45 degree angle between vertical and horizontal plane, and the other is vertical and vertical installation with horizontal plane. The latter is recommended. The former sometimes needs welding and collision, which is very troublesome and the effect is not good. Commonly used stainless steel plates are divided into 201 and 304 types. In fact, the composition is different. The quality of 304 is a little better, but the price is higher. 201 is a little poor. Large shopping malls or office buildings need 304 stainless steel to meet the demand. The thickness of the plate is also different, generally 0.6 is enough.
不銹鋼板的表面處理也分為鏡面和油膜刷。一般來說,鏡面不銹鋼不用于商業裝飾。油膜拉伸更好
The surface treatment of stainless steel plate is also divided into mirror and oil film brush. Generally speaking, mirror stainless steel is not recommended for commercial decoration. Better oil film stretching
表面處理
surface treatment
不銹鋼門套的特點:
Features of stainless steel door pocket:
外形美觀,設計合理,耐酸堿,易清洗無施工工藝污染,無需涂膠、油漆,門套表面霸氣典雅,征服五彩繽紛的偽裝。
It has beautiful appearance, reasonable design, acid and alkali resistance, easy cleaning, no construction process pollution, no glue and paint. The surface of the door pocket is domineering and elegant, conquering the colorful camouflage.
衛生性能、性能優越。不銹鋼的外觀并不比其他裝飾材料差。它在功能上優于任何一方。
Superior sanitary performance and environmental protection performance. The appearance of stainless steel is no worse than that of other decorative materials. It is superior to either party in function.
具有金屬光澤和硬度,不易損壞。不銹鋼門套,生活。公共空間的設計非常和諧適。
It has metallic luster and hardness and is not easy to be damaged. Stainless steel door pocket, life. The design of public space is very harmonious and comfortable.
商務公寓產品應用具有時尚、個性、快捷的特點,滿足年輕精英群體對生活品質的要求。
The application of Business Apartment products has the characteristics of fashion, personality and quickness, and meets the requirements of young elite groups for quality of life.
不銹鋼電梯門套
Stainless steel elevator door pocket
不銹鋼門套質量標準
Quality standard of stainless steel door pocket
所有黑鈦不銹鋼門框的落料準確,部件長度的允許偏差為1mm。
The blanking of all black titanium stainless steel door frames is accurate, and the allowable deviation of component length is 1mm.
切割前要檢查不銹鋼門框是否平直,否則調直。
Before cutting, check whether the stainless steel door frame is straight, otherwise straighten it.
焊接時,焊條或焊絲應與焊接材料相適應,不銹鋼門框的焊接材料品種應有出廠合格證。
During welding, the welding rod or wire shall be compatible with the welding material, and the variety of welding material for stainless steel door frame shall have factory certificate.
焊接時,不銹鋼門框的位置正確。
When welding, the position of stainless steel door frame is correct.
焊接時,不銹鋼門框之間的焊點應牢固、充足,焊縫表面焊縫應均勻。焊縫不得有咬邊、裂紋、裂紋、浮渣、焊塊、燒穿、電弧劃傷、弧坑和針狀氣孔,焊接區域不得飛濺。
During welding, the welding points between stainless steel door frames shall be firm and sufficient, and the welds on the weld surface shall be uniform. The weld shall be free of undercut, crack, crack, scum, welding block, burn through, arc scratch, arc pit and needle pore, and the welding area shall not splash.
不銹鋼門框焊接后,應清焊渣。
After the stainless steel door frame is welded, the welding slag shall be removed.
不銹鋼門框焊接組裝后,用手持式機器進行適當的打磨和拋光,使其外觀光滑整齊。
After the stainless steel door frame is welded and assembled, it shall be properly polished and polished with a hand-held machine to make its appearance smooth and tidy.
以上就是拉絲不銹鋼門套小編今天帶給大家的精彩內容了,更多的精彩內容請點擊進入我們的網站http://www.yippyshippy.com
The above is the wonderful content brought to you by the small series of brushed stainless steel door covers today. For more wonderful content, please click to enter our website http://www.yippyshippy.com